3.9.1 Fixed views
Fixed views show the operating hours and the time.
Fixed views have two functions displayed on the bottom row, the operating hours
and the clock .
GUID-7B5434D5-0FA3-4C91-9872-50CB49B6C364
1. Operating hours
2. Clock
Operating hours
Operating hours are displayed with an accuracy of one decimal place when the
power is on.
Clock
The clock is displayed on the bottom row, either in 12-hour or 24-hour mode.
You can change the time if it is not correct.
3.9.2 Selecting a view
You can use the top and middle rows of the instrument panel display to show the
different functions.
GUID-282EB42A-C95A-41B7-A765-BBF5A9F4D27B
1. Top row
2. Middle row
3. Proline instrument panel display change-over switch
• To select a function to display when the two-row display are in use:
• Press the symbol side of the display change-over switch to browse for
the functions on the top row.
• Press the side of the display change-over switch opposite to the symbol
to browse for the functions on the middle row.
3. Operation
- 126 -
To Next Page
Loading...
Need help?
General
