EasyManuals Logo

Valtra HiTech T3 Series User Manual

Valtra HiTech T3 Series
370 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #239 background imageLoading...
Page #239 background image
• Wipe the stains by using a detergent or plenty of water.
The coated parts of the windows withstand different detergents well.
NOTE: Do not use abrasive detergents and do not rub the windows dry.
• Do not use the window wiper on a dry window.
Ensure that there is enough fluid in the washer reservoir.
• Never clean the polycarbonate windows using a sharp tool like an ice scraper.
4.3.2 Greasing lubricating points fitted with grease nipples
1. Always clean the grease nipples before applying the grease gun.
2. Apply grease through the nipples until clean grease oozes out (unless
otherwise instructed).
NOTE: Preferably carry out lubrication with bearing points and joints
unloaded and with the bearings in different positions.
3. Wipe away superfluous grease which has been pressed out at the lubricating
point.
4.3.3 Supporting the tractor
Follow these instructions when supporting the tractor.
• The tractor must be supported on suitable blocks or stands.
4. Maintenance
- 238 -

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Valtra HiTech T3 Series and is the answer not in the manual?

Valtra HiTech T3 Series Specifications

General IconGeneral
BrandValtra
ModelHiTech T3 Series
CategoryTractor
LanguageEnglish

Related product manuals