1. Stop the engine and turn the ignition switch off.
2. Engage the parking brake.
3. Press the pre-programming push button, depress the clutch pedal and turn
the ignition on at the same time.
The setting menu symbols (D) appears on the display. The first two bars are
lit to indicate that the parameter number is shown on the bottom row.
4. Press the Powershift push buttons to select the driving start automatics ON/
OFF parameter.
GUID-CC3B4054-D369-4027-B56A-D4A5AC0CC346
5. Press the Powershift pre-programming button.
The last two bars are lit to indicate that the parameter value is shown on the
bottom row.
6. Change the parameter value by pressing Powershift push buttons.
GUID-3C87E06D-88B8-4865-8A29-9A7E994494E9
7. Press the Powershift pre-programming button to save the value.
3. Operation
- 123 -
To Next Page
Loading...
Need help?
General
