• To use the position lock:
To use the position lock the tractor needs to be equipped with the valve that
has position lock.
• Push the control lever for the auxiliary hydraulics rear valve 3 or the
control lever for the auxiliary hydraulics rear valve 4 to the extreme
position to activate the position lock.
Push the control lever for the auxiliary hydraulics rear valve 3 or the
control lever for the auxiliary hydraulics rear valve 4 past the maximum
flow point with increased force to lock it in the extreme position.
• Return the control lever for the auxiliary hydraulics rear valve 3 or the
control lever for the auxiliary hydraulics rear valve 4 manually to the
middle position to deactivate the position lock.
• To use the floating position:
To use the floating position the tractor needs to be equipped with the valve
that has floating position.
If the tractor is equipped with the valve where the floating position is at the
extreme position of the lever:
• Push the control lever for the auxiliary hydraulics rear valve 3 or the
control lever for the auxiliary hydraulics rear valve 4 to the extreme
position to activate the floating position.
Push the control lever for the auxiliary hydraulics rear valve 3 or the
control lever for the auxiliary hydraulics rear valve 4 past the maximum
flow point with increased force to lock it in the extreme position.
• Return the control lever for the auxiliary hydraulics rear valve 3 or the
control lever for the auxiliary hydraulics rear valve 4 manually to the
middle position to deactivate the floating position.
If the tractor is equipped with the valve where the floating position is at the
middle position of the lever (valve for a hydraulic motor):
• Push the control lever for the auxiliary hydraulics rear valve 3 or the
control lever for the auxiliary hydraulics rear valve 4 in the middle position
to activate the floating position.
Both valve ports are connected to the tank.
• Move the control lever for the auxiliary hydraulics rear valve 3 or the
control lever for the auxiliary hydraulics rear valve 4 manually away from
the middle position if you need hydraulic pressure.
3. Operation
- 180 -
To Next Page
Loading...
Need help?
General
