GUID-D381CC58-1E06-49BB-8F80-32FBB58821E1
1. Cover
IMPORTANT: Make sure that the angles of the joint of the joint shaft are not
exceeded.
IMPORTANT: Do not exceed the maximum output durability of the PTO pin.
WARNING: If the tractor engine stops for example due to overloading
when using the PTO, turn the power off before restarting. This
prevents an unintentional engagement of the PTO.
• Make sure that the length of the PTO drive shaft is correct for the PTO-driven
implements to be used.
The shaft must be able to work at full deflection vertically and horizontally.
IMPORTANT: A shaft that is too long can cause damage.
• Install the PTO drive shaft according to the manufacturer's instructions.
DANGER: When fastening the power take-off (PTO) drive shaft
between the tractor and the implement, check that its guard is
undamaged.Attach the guard to a stationary part of the tractor
frame or implement.
• Attach the PTO-driven implement to the tractor.
IMPORTANT: Attach the implement to the tractor before connecting the
power take-off (PTO) drive shaft between the tractor and the implement.
Otherwise the implement can start to rotate with the PTO drive shaft.
• Engage the PTO at a low engine speed to protect the PTO.
3. Operation
- 193 -
To Next Page
Loading...
Need help?
General
