GUID-DFB062C5-3EEE-4ECD-BFC7-61103D0CB33E
1. Mounting bracket
2. Mounting bracket
3. Bus extension connectors, ISOBUS system
4. ISOBUS terminal connector
5. Implement signal connection
6. ISOBUS implement connector, the front connector is extra equipment.
The Valtra ISOBUS controls the electric power of the system and the data
transfer between the tractor and the implement. This data includes:
• Power management
• Ignition switch state
• Maintenance of the power request. The implement connected to the
ISOBUS system can request the tractor to maintain power for the next
two seconds.
• Speed information
• Transmission speed, tractor speed calibrated from the tyres
• Speed information of the radar
• Engine speed
• Linkage information
• Rear linkage position
• Rear implement in-work indication
• Power take-off (PTO) information
• Rear PTO speed
• Rear PTO engagement
• Lighting information
• Direction indicators
• Marker lights (parking lights, side amber driving lights, number plate
lights and instrument and switch lights)
• Brake lights
• Tractor rear working lights
• Distance and driving direction
3. Operation
- 209 -
To Next Page
Loading...
Need help?
General
