Valtra HiTech T3 Series User Manual

Maintenance check point 10 h 50 h 500 h 1000 h 2000 h
Check the belts' tightness. ● ● ● ●
Check the fuel system prefilter and sediment bowl. ● ● ● ●
Check the electrolyte level in the battery. ● ● ● ●
Check the tyre pressure. ● ● ● ●
Check wheel nut tightness. ● ● ● ●
Check the emergency brake ● ● ● ●
Check the windscreen washer fluid ● ● ● ●
Grease door hinges. ● ● ●
Change the engine oil and filter.
●
1)
● ●
Check the engine breathing system ● ● ●
Clean the cab air filter. ● ● ●
Check the brake pedal free travel. ● ● ●
Check the parking brake. ● ● ●
Change the oil filters of the transmission and hydraulics. ● ● ●
Check the oil level in the front axle differential and hubs. ● ● ●
Change the front power take-off oil and wash the oil filter. ● ● ●
Check the front power take-off rubber couplings. ● ● ●
Grease the rubber surfaces of the trailer quick couplings. ● ● ●
Check the integrity of the air pressure system. ● ● ●
Adjust the engine valves.
●
2)
Change the oil in the front axle differential and hubs. ● ●
Change the cab air filter. ● ●
Change the recirculation air filter. ● ●
Change the fuel filter and prefilter.
●
3)
●
Change the engine air filters. ● ●
Change the selective catalytic reduction system supply module
main filter
● ●
Grease the flywheel ring gear. ● ●
Check the front wheel toe-in. ● ●
Check the power shuttle operation. ● ●
Tighten the frame nuts and bolts.
●
4)
●
Change the oil in the transmission and clean the suction strainer. ●
Change the transmission breather. ●
Change the oil in the brake circuits. ●
Change the oil in the front axle brake system. ●
Clean the cooling system. ●
Change the cap of the coolant expansion tank. ●
Check the cab mounting. ●
Maintain the air conditioning. ●
1)
In extremely dusty conditions or when using over 5% Biodiesel fuel, change the oil and filters
every 250 hours.
2)
After the first adjustment, adjust the valves every 1 000 hours.
3)
When using over 5% Biodiesel, change the fuel filter and prefilter every 500 hours.
4)
If the tractor is fitted with a front loader, tighten the frame nuts and bolts every 500 hours.
4. Maintenance
- 246 -

Valtra HiTech T3 Series Specifications

General

Brand	Valtra
Model	HiTech T3 Series
Category	Tractor
Language	English