6. Remove the rubber cover.
GUID-2407DF18-0EFB-4D97-A262-CC24856C03E6
1. Rubber cover
7. Clean the filter cover and its surroundings.
8. Remove the filter cover.
Use 27 mm wrench.
9. Pull out the filter parts.
GUID-E6DEB0E6-D7D6-47A4-80A8-5744627599A7
1. Filter
2. Equalizing element
3. Filter cover
10. Fit the new filter elements.
11. Fit the filter cover.
The tightening torque is 20-25 Nm.
12. Connect the battery leads.
Connect the positive lead first.
13. Tighten the battery holders.
14. Turn up the steps.
4. Maintenance
- 288 -
To Next Page
Loading...
Need help?
General
