4. Press the Powershift push buttons to select the parameter to be changed.
GUID-15319FF0-E018-4091-A7C3-D840178007E3
The parameter number for the tyre parameter is 0001.
5. Press the Powershift pre-programming button.
GUID-403237A4-1330-47F5-8C7D-4B445B47E3FC
The last two bars are lit to indicate that the parameter value is shown on the
bottom row.
6. Change the parameter value by pressing Powershift push buttons.
7. Press the Powershift pre-programming button to save the value.
You can discard the changes by pressing the HiShift push button.
8. Press the HiShift push button to leave the setting menu and save all changes.
If you want to leave the setting menu and discard all changes made, turn the
ignition switch off.
4. Maintenance
- 303 -
To Next Page
Loading...
Need help?
General
