INFORMATION
M6040, M7040, WSM
I-10
3. SPECIFICATIONS
• *1: Manufacture's estimate
*2: At lower link end with links horizontal.
The company reserves the right to change the specifications without notice.
Model
M6040 M7040 M7040DTH-SPA
4WD
Engine
Model V3307-DI-TE3
Type Vertical, water-cooled, 4-cycle direct injection diesel engine
Number of cylinders 4
Total displacement 3331 cm
3
(203 cu.in.)
Bore and stroke 94 × 120 mm (3.7 × 4.7 in.)
Rated speed 2600 min
-1
(rpm)
Net power*
1
47.3 kW (63.5 HP) 52.9 kW (71.0 HP)
Gross power*
1
49.2 kW (66 HP) 54.9 kW (73.6 HP)
Maximum torque
220 N·m (22.4 kgf·m,
162 lbf·ft) /
1500 to 1700 min
-1
(rpm)
252 N·m (25.7 kgf·m, 186 lbf·ft) /
1500 to 1700 min
-1
(rpm)
Battery capacity 12 V, RC: 160 min, CCA: 900 A
Fuel tank
capacity
ROPS Model 70 L (18.5 U.S.gals, 15.4 Imp.gals)
CABIN Model 90 L (23.8 U.S.gals, 19.8 Imp.gals)
Engine oil capacity 11 L (11.6 U.S.qts, 9.7 Imp.qts)
Coolant capacity 8 L (8.5 U.S.qts, 7.0 Imp.qts)
Dimensions
Overall length
ROPS Model 3615 mm (142.3 in.) 2435 mm (95.87 in.)
CABIN Model 3675 mm (144.7 in.) –
Overall width (min. tread) 1855 mm (73.03 in.)
Overall height
ROPS Model 2495 mm (98.23 in.)
CABIN Model 2545 mm (100.2 in.) –
Wheel base
ROPS Model 2050 mm (81 in.)
CABIN Model 2110 mm (83.1 in.) –
Tread
Front 1420, 1537 mm (55.9, 60.51 in.)
1365, 1385, 1415 mm
(53.74, 54.53, 55.71 in.)
Rear 1416 to 1733 mm (55.75 to 68.22 in.)
1545 to 1737 mm
(60.83 to 68.38 in.)
Minimum
ground
clearance
ROPS Model 420 mm (16.5 in.) (Fuel tank stay)
360 mm (14.2 in.)
(Fuel tank stay)
CABIN Model
430 mm (16.9 in.)
(Fuel tank stay)
415 mm (16.3 in.)
(Fuel tank stay)
–
Weight
ROPS Model 2450 kg (5401 lbs) 2245 kg (5390 lbs)
CABIN Model 2730 kg (6019 lbs) –
Traveling
system
Standard tire
size
Front 320/85R24 (12.4R20) 320/70R20
Rear 420/85R30 (16.9R30) 420/70R28
Clutch Multiple wet discs
Steering Hydraulic power steering
Braking system Hydraulic wet discs
Differential Bevel gears with differential lock (rear)
Hydraulic
system
Hydraulic control system Position, draft (top link sensing) and mix control
Pump capacity 61 L (16 U.S.gals, 13 Imp.gals) /min
3-point hitch SAE Category 1 and 2
Max. lifting
force
At lift points*
2
2300 kg (5071 lbs)
24 in. behind
lift points*
2
1800 kg (3968 lbs)
Remote hydraulic control Two remote valves (3rd valve option) Max. Three
System pressure 19.1 MPa (195 kgf/cm
2
, 2270.3 psi)
Traction system Drawbar with clevis
To Next Page
Loading...
