wsm M7040 - Recirculation;Fresh Air Motor

CABIN
M6040, M7040, WSM
10-S29
(9) Recirculation/Fresh Air Motor
Recirculation/Fresh Air Motor Checking
1. Confirm whether the recirculation/fresh air selection switch (2)
is defective. (See page 10-S24.)
2. Turn the main switch to "ON" position.
3. Turn the blower switch at 1 position.
4. Push the recirculation/fresh air selection switch to
"Recirculation" position.
5. If the motor does not move, replace it.
9Y1210143CAS0051US0
(1) Recirculation/Fresh Air Motor
(2) Recirculation/Fresh Air Selection
Switch
(3) Blower Switch
KiSC issued 07, 2012 A