wsm M7040 - Bonnet (ROPS Model); Front Axle Rocking Restrictor

TRANSMISSION
M6040, M7040, WSM
3-S18
(3) Front Axle Rocking Restrictor
Front Axle Rocking Rectrictor
1. Install the front axle rocking restrictor (1) (see page G-64) to the
front axle bracket on both side.
9Y1210143TRS0023US0
(4) Bonnet (ROPS Model)
Bonnet
1. Open the bonnet (1) and disconnect the battery negative
terminal.
2. Disconnect the connector (3) for head lights.
3. Disconnect the damper (4).
4. Remove the bonnet (1) and side cover (2) for both side.
IMPORTANT
• When disconnecting the battery cables, disconnect the
grounding cable first. When connecting, positive cable
first.
9Y1210143ENS0031US0
(1) Front Axle Rocking Restrictor
(1) Bonnet
(2) Side Cover
(3) Connector
(4) Damper
(5) Wire Harness (Head Light)
KiSC issued 07, 2012 A