wsm M7040 - Page 412

HYDRAULIC SYSTEM
M6040, M7040, WSM
8-S6
(Continued)
[Power Steering Pump Delivery]
Condition
• Engine speed
Approx. 2600 min
-1
(rpm)
• Rated pressure
18.1 MPa (185 kgf/cm
2
, 2631 psi)
• Oil temperature
50 to 60 °C (122 to 140 °F)
[Three Point Pump Delivery]
Condition
• Engine speed
Approx. 2600 min
-1
(rpm)
• Rated pressure
19.1 MPa (195 kgf/cm
2
, 2770 psi)
• Oil temperature
50 to 60 °C (122 to 140 °F)
9Y1210143HYS0004US0
Hydraulic pump delivery
at no pressure
Factory specification
Above
21.8 L/min
5.76 U.S.gals/min
4.80 Imp.gals/min
Hydraulic pump delivery
at rated pressure
Factory specification
21.3 L/min
5.63 U.S.gals/min
4.69 Imp.gals/min
Allowable limit
18.0 L/min
4.76 U.S.gals/min
3.96 Imp.gals/min
Hydraulic pump delivery
at no pressure
Factory specification
Above
63.0 L/min
16.64 U.S.gals/min
13.86 Imp.gals/min
Hydraulic pump delivery
at rated pressure
Factory specification
61.0 L/min
16.1 U.S.gals/min
13.4 Imp.gals/min
Allowable limit
51.5 L/min
13.6 U.S.gals/min
11.3 Imp.gals/min
KiSC issued 07, 2012 A