GENERAL
M6040, M7040, WSM
G-26
Checking Fuel Line
1. Check to see that all lines and hose clamps are tight and not
damaged.
2. If hoses and clamps are found worn or damaged, replace or
repair them at once.
• If the fuel line is removed, be sure to properly bleed the fuel
system. (See page G-39.)
9Y1210143GEG0021US0
Adjusting Brake Pedal
1. To check and adjusting for brake pedal.
(See page 5-S4.)
9Y1210143GEG0022US0
Adjusting Parking Brake Lever
1. To check and adjusting for parking brake lever.
(See page 5-S7).
9Y1210143GEG0023US0
Checking Battery Condition
• Never remove the vent plugs while the engine is running.
• Keep electrolyte away from eyes, hands and clothes. If you
are spattered with it, wash it away completely with water
immediately and get medical attention.
• Keep open sparks and flames away from the battery at all
times. Hydrogen gas mixed with oxygen becomes very
explosive.
• Wear eye protection and rubber gloves when working
around battery.
1. The original battery is maintenance free type battery
(Non-refillable type).
When the performance becomes low, inspect the battery.
2. Clean the battery surface with a clean cloth.
Keep the terminals clean and coated with petroleum jelly.
3. Check the battery condition by reading the indicator.
9Y1210143GEG0024US0
(1) Fuel Line (2) Clamp Band
State of indicator display
Green
Specific gravity of electrolyte and quality of electrolyte
are both in good condition.
Black Needs charging battery.
White Needs changing battery.
(1) Battery (2) Indicator
To Next Page
Loading...
