Xerox WorkCentre 7132 User Guide

15 Problem Solving
420 Xerox WorkCentre 7132 User Guide
027-737 An error occurred during reading of data from the job template server. Check the
access rights of the directory in which the job template is stored.
027-739 Unable to find the specified job template server. Check the path name to the job
template server.
027-740 Unable to log in to the job template server. Verify that the correct log-in user
name, password and other information are entered.
027-741 Unable to connect to the job template server. Ask the network administrator to
check the network or server.
027-742 The job template could not be stored to memory due to insufficient disk space.
Delete unnecessary data from the disk.
027-743 The settings on the job template server are incorrect. Check the settings of the
job template server.
027-744 There is a problem in the domain name of the job template server. Make sure
that the DNS server connection and the domain name are registered to the DNS
server.
027-745 The address of the DNS server is not registered on the machine. Register the
address of the DNS server on the machine, or set the address of the job
template server as an IP address.
027-746 The protocol setting of the job template server is not correct. Set up the correct
port.
027-750 Fax forwarding, printing, or Internet Fax forwarding was attempted for a
scanned document. Fax forwarding, printing, and Internet Fax forwarding
cannot be performed for scanned documents.
027-751 An error occurred while processing a job flow sheet. Check the job flow sheet.
027-752 The job flow has a parameter that requires user input that was not entered.
Perform one of the following:
• Do not tie the job flow with required user input to a mailbox.
• Set the default values for the job flow required user input parameters.
027-753 The required port was not open to the job attempted by a job flow sheet. Contact
the Key Operator.
027-754 The settings for [DocuWorks Signature] or [PDF Signature] on the job flow are
incorrect. Check the DocuWorks and PDF signatures for both the system data
settings (machine's current settings) and the executed job flow settings. If these
settings are not the same, change either of them.
027-796 E-mail without an attachment was discarded, because the machine is set to
print only the attached document of e-mail. To print body text and the header of
e-mail in addition to its attachments, change settings in [Properties] on
CentreWare Internet Services.
027-797 The output destination is not correct. Specify the correct destination, and resend
the e-mail.
Code Description and Remedy
Downloaded From ManualsPrinter.com Manuals

Xerox WorkCentre 7132 Specifications

General

Brand	Xerox
Model	WorkCentre 7132
Category	All in One Printer
Language	English