Yamaha F150A - Installing the Stator Assembly

7-14
Flywheel magnet
3. Remove the holders “1” and “2” and
blowby hose “3”.
4. Remove the wiring harness “1” from the
holders “2”.
5. Remove the stator assembly “1” and
pulser coil “2”.
Installing the stator assembly
1. Install the dowels “1”, pulser coil “2”, and
stator assembly “3”.
2. Install the wiring harness “1” to the hold-
ers “2”.
3. Install the blowby hose “1” and holders
“2” and “3”.
4. Connect the lighting coil coupler “a”.
1
2
3
1
2
2
1
2
3
2
1
1
1
2
2
2
3
1
a