Yamaha F150A - Removing the Power Unit

7-7
Power unit assembly
0
1
2
3
4
5
6
7
8
9
10
A
Removing the power unit
1. Remove the clip “1” and throttle cable “2”.
2. Disconnect the battery cables “1”.
3. Remove the junction box cover “2”.
4. Disconnect the PTT motor leads “1”.
5. Disconnect the 10-pin coupler “a”.
6. Disconnect the fuel hose “1”.
7. Disconnect the vapor gas hose “1”.
8. Remove the dipstick guide “1”.
9. Disconnect the PTT switch coupler “a”
and trim sensor coupler “b”.
1
2
1
2
1
1
a
1
1
1