1-1
Model feature
Model feature
General feature
F150A, FL150A, F150B, FL150B overall feature
• Electronic fuel injected, 4-stroke, L4, DOHC, 16-valve, 2670.0 cm
3
(162.9 cu. in) engine
• Low exhaust emissions conform to EU regulations
• Y-COP (standard for European market and optional for Oceanian market)
• Tilt limiter (F150A, FL150A [optional for European and Oceanian markets])
a. Power unit
• Shimless valve lifter
• Multi-point electronic fuel injection
• Offset cylinder
• 4 throttle valves
• Large intake silencer
• Blowby gas reburning system
• Fuel cooler
• Vapor gas treatment
• Freshwater flushing device
• Speed sensor and water pressure sensor
(optional)
b. Electrical
• Electronic fuel injection control
• Digital ignition control
• Vaper shut-off valve control
• ISC (Idle Speed Control)
• Over-rev control
• Self-diagnosis system with flash indicator
and YDIS (New YDIS version 2.00 or later)
• Conventional or LAN gauges acceptable
• Fail-safe control
• Alert systems including low oil pressure,
overheat, and water detection
c. Bracket unit
• New PTT unit
d. Upper case
• Labyrinth idle exhaust system
• Water-sealed outer wall
e. Lower unit
• Direct shifting system (without shifter)
• Patented shift damper system (SDS propel-
ler)
a
b
c
d
e
To Next Page
