Yamaha F150A - Installing the Lower Unit (X-Transom Model)

8-65
Drive shaft and lower case (counter rotation model)
Installing the lower unit (X-transom
model)
1. Check that the shift rod is in the N posi-
tion. See steps 1 and 2 in “Installing the
lower unit (L-transom model)” (8-29).
2. Install the extension and lower unit. See
steps 2–6 in “Installing the lower unit (X-
transom model)” (8-30).
3. Install the trim tab and propeller. See
steps 6–9 in “Installing the lower unit (L-
transom model)” (8-29).
4. Fill the lower unit with gear oil up to the
proper level. See steps 5–9 in “Changing
the gear oil” (10-11).