Yamaha F150A - Bracket Unit 9

Bracket unit 9
Shift rod and shift bracket ................................................ 9-1
Removing the shift rod and shift bracket ................................... 9-3
Disassembling the shift bracket ................................................. 9-3
Assembling the shift bracket ..................................................... 9-3
Installing the shift rod and shift bracket ..................................... 9-4
PTT switch and cowling lock lever .................................. 9-6
Removing the PTT switch ......................................................... 9-8
Removing the cowling lock lever ............................................... 9-8
Removing the flushing hose ...................................................... 9-8
Installing the flushing hose ........................................................ 9-8
Installing the cowling lock lever ................................................. 9-9
Installing the PTT switch ........................................................... 9-9
Bottom cowling ............................................................... 9-11
Upper case and mounts ................................................. 9-13
Removing the upper case ....................................................... 9-15
Installing the upper case ......................................................... 9-15
Upper case ....................................................................... 9-17
Disassembling the upper case ................................................ 9-18
Checking the drive shaft bushing ............................................ 9-18
Assembling the upper case ..................................................... 9-18
Oil pan and exhaust manifold ........................................ 9-20
Disassembling the oil pan and exhaust manifold .................... 9-22
Checking the oil pan and exhaust manifold ............................. 9-22
Checking the oil strainer .......................................................... 9-22
Assembling the oil pan and exhaust manifold ......................... 9-22
Steering arm .................................................................... 9-24
Removing the steering arm ..................................................... 9-25
Installing the steering arm ....................................................... 9-25
Clamp bracket and swivel bracket ................................ 9-27
Removing the clamp bracket ................................................... 9-30
Checking the clamp bracket anode ......................................... 9-30
Installing the clamp bracket ..................................................... 9-30
Adjusting the trim sensor cam ................................................. 9-32