Accutome a-scan plus - Starting a New Patient

154
Accutome A-Scan Plus User’s Guide
 OD/OS - toggles between the OD and OS eye;
selecting OD or OS displays the waveforms for
that eye. OD/OS must be set accordingly
before capturing waveforms.
 Start New Patient - clears the current patient
information and measurements and resets
gain, gate, and ID to default values.
 Customize Eye Type... - displays the
Customize Eye Type screen where you can
customize the eye type for the current patient
or review the current eye type definition.
Custom Eye Types are associated with the
current patient only and are not available to
other patients. Permanent changes to eye
types can be made on the Eye Types Screen.
Starting a New Patient
You can start a new patient from either the Measure
Screen, Calculate IOL Screen, or from the Patient
Records Screen. Once you start a new patient, the
Accutome A-Scan Plus will clear all previous patient
information and set gain, gate and ID to the default
values.
After starting a new patient, select the eye to be
measured, OD or OS, and verify the eye type for that
eye.