241
Storing and Recalling
Records
Overview You can save a patient record at any time for later review
or calculation. If you are away from your printer, you can
save the current patient measurements and print the
patient’s record at a later date.
The Accutome A-Scan Plus makes storing patient
records an easy process. Push the Patient Record
button and the Patient Records Screen, where you can
store and recall all measurement parameters and
calculations, will be displayed. All waveform
measurement and IOL calculation settings and data are
stored with each patient record when it is saved.
Recalling a patient record at a later date allows you to
view the patient record exactly as it was saved. Changes
to instrument settings including Eye Types and
measurement controls made after the patient is stored
and before the patient is recalled do not effect the
recalled patient measurements or IOL calculations.
When you recall a patient record the instrument is set to
same settings as when you stored the record. Asterisks
will appear if settings have altered.
To Next Page
Loading...
