64
Accutome A-Scan Plus User’s Guide
Using the
Footswitch
The footswitch performs four functions:
1. When you are acquiring measurements, the foot
switch will capture a waveform.
2. Will select one of the five waveforms on the Mea-
sure Screen.
3. Will delete the current waveform on the Measure
Screen.
4. Will access the Measure Screen from any other
screen.
If you are in a screen, other than the Measure Screen,
pressing the foot switch will bring you to the Measure
Screen. In the Measure Screen the foot switch allows
you to capture, select, or reject a waveform.
When on the eye and running, pressing the foot switch
captures the data.
The foot switch can be used to select a waveform on the
Measure Screen. If you want to scroll through the list of
(up to) five waveforms, step on the foot switch. If you
would like to recapture that waveform, step on the foot
switch and keep pressing, for approximately one second,
until the selected waveform clears from the
measurements table.
To Next Page
Loading...
