10
Accutome A-Scan Plus User’s Guide
and test repetition As Low As Reasonably Achievable to
achieve the required diagnostic information.
Disinfection and Cleaning
The recommended disinfection technique is to clean the
probe membrane and tip assemblies with isopropyl
alcohol (and no other substance). It is imperative that
the alcohol be given time to evaporate before applying a
probe to the patient’s eye.
WARNING! DO NOT
AUTOCLAVE!
Disinfection issues are confined to the Accutome probe
that comes in contact with the patient’s eye. In order to
prevent the transmission of disease, refer to the OSHA
and CDC guidelines for proper control of disinfection.
These guidelines are frequently updated so be sure to
contact OSHA, CDC, or your local disease control for the
latest information and disinfection technique.
WARNING! DO NOT IMMERSE
THE PROBE’S
CABLE OR METAL
CONNECTOR.
ALLOW TO DRY
BEFORE USE.
To Next Page
Loading...
