214
Accutome A-Scan Plus User’s Guide
Calculation Results
After all fields have been entered, the Calculate IOL
Screen will display the power of the IOL, for each lens
with bold, large, black numbers. These values are the
optimal powers for the specified target refraction, and do
not necessarily exist in the real world.
A list of five IOL powers and their expected refraction, in
0.5 D increments and centered on the result closest to
the target power, is displayed for each IOL.
The Accutome A-Scan Plus also provides you with a
lens value for a zero target (Emmetropic). The zero
target values are listed below the optimal IOL powers in
small numbers.
Switching Between OD/OS
To perform a calculation for the current Patient’s other
eye, press on the button beneath "OD/OS". This button
toggles between the two eyes and will display the
readings for either OD or OS as the button is switched.
To Next Page
Loading...
