Accutome a-scan plus - Updating IOL Constants

218
Accutome A-Scan Plus User’s Guide
Entering IOL Group Names
To enter an IOL Group Name:
1. In the IOL Groups screen, rotate the knob to select
an empty Group field. (Selection is indicated by a
solid black border). You can also press the buttons
beneath the "Scroll Groups Up" and Scroll Groups
Down" selections to locate an empty space.
2. Press the knob or the √ button, to activate the
field, indicated by the dashed border.
3. Within the Group field enter the name of the Group
for which you are entering lenses.
4. Press the knob or the √ button, to save the
selected Group name and to deactivate the field.
Figure 146 Entering the IOL Group Name