Accutome a-scan plus - How to Delete a Measurement

167
Performing Measurements How to Delete a Measurement
How to Delete
a Measure
-
ment
You may want to delete one of the captured patient
measurements. You can delete a measurement with the
"X" button, the keyboard delete key or by using the foot
switch
Deleting a Measurement with X Button or Keyboard
To delete a selected waveform press on the "X" button or
the delete key on the keyboard when the waveform or
measurement table is selected.
Deleting a Measurement with the Foot Switch
You can also press on the footswitch to delete the active
measurement and start a new measurement. With the
measurement you would like to delete selected, press on
the footswitch and hold for approximately one second.
The line in the measurement table will clear and you can
recapture the waveform.
Tip: You can use DELETE on the keyboard to delete
the active measurement.