186
Accutome A-Scan Plus User’s Guide
Switching
Eyes
It is very simple to switch between eyes using the
Accutome A-Scan Plus. To switch from OD to OS, or
from OS to OD press the button beneath the selection
OD/OS. The waveforms and eye type for the selected
eye will be displayed.
Tip: You can use O or CTRL+O to switch between
OD and OS.
Customize Eye
Type
You can also customize a Patient’s eye type on the fly.
The soft menu selection "Customize Eye Type..."
launches the Customize Eye Type Screen where
customizing on a per patient basis occurs.
Refer to "Customizing Eye Types" on page 187 of this
manual for customizing eyes.
*Note: At this point you should either calculate the
replacement lens or save the measurement record.
Refer to either
"Performing Calculations" on
page 197 or "Storing and Recalling Records" on
page 241 of this manual.
To Next Page
Loading...
