39
Getting Started Basic Operation
Screen Keyboard Features
The screen keyboard is displayed at the bottom of the
screen and is divided into a row of selectable
alphanumeric characters and soft menu selections. The
background of the selectable characters is white and
has a border drawn around it to distinguish the
characters from the active buttons.
The screen keyboard also has the following soft menu
selections activated by buttons beneath the selection:
Undo - clears the active field.
Backspace - deletes the character immediately
to the left of the cursor.
Space - inserts a space after the last
character.
Case - toggles the selectable characters
between upper and lower case.
Done - exits the screen keyboard and returns
you to the Measure screen. The selected field
will display the edited text.
Special characters are located in between alpha and the
numeric letters. You can enter a space in a field by
selecting the space between the alpha and numeric
characters or by pressing the button below the "Space"
soft menu selection.
If you would like to switch to lower case press the button
below "Case". The Accutome A-Scan Plus automatically
selects upper case for a blank field, unless the field has
been previously edited in lower case and will then revert
to lower case.
The Accutome A-Scan Plus allows you to switch
between using the optional keyboard and the screen
keyboard. If you have the optional keyboard and would
like to use the screen keyboard, press Ctrl-K . The
screen keyboard will then be shown for current and
future text edits until you press a key on the optional
keyboard.
To Next Page
Loading...
