233
Personalizing Lens Constants How to Personalize Constants
Manually Entering Patient Information
To enter patient information manually:
1. Rotate the knob to select the Postoperative
Results table, indicated by a solid black border.
2. Press the knob or the √ button, to activate the
postoperative results table.
3. Rotate the knob and select the Patient field of the
first postoperative result that you are entering.
The last row of the table is where you can enter
post operative results. If the row is not there, you
have reached the maximum number of results
(50).
4. Enter the Patient ID.
5. Press the knob or the √ button, to save the
entered ID.
6. Rotate the knob and select the AXL field of the first
postoperative result that you are entering.
7. Enter the AXL value.
8. Enter the ACD value - required for Haigis formula.
9. Press the knob or the √ button, to save the
entered value.
10. Rotate the knob and select the K1 field.
11. Enter the K1 value.
12. Press the knob or the √ button, to save the
entered value.
13. Continue entering the field values until you have
keyed in all the postoperative values for:
AXL- Axial Length in mm
K1, K2 - Keratometry measurements in
Diopters or mm
*Note: The "0.00" values for the Sph and Cyl cells of the
Postoperative Results table are present to indicate
the last row of the table.
To Next Page
Loading...
