43
Getting Started Basic Operation
How to Perform a Calculation
After you have completed a Patient’s scans you can
calculate the power of the IOL for the Patient. You can
perform the calculation from the Calculate IOL Screen.
To calculate a lens:
1. Press the Calculate button, located at the right
side of the front panel (see
Figure 17 on page 31).
2. The Accutome will display the Calculate IOL
Screen as shown in
Figure 25 below.
*Note: For more information on Calculating IOLs refer to
"Performing Calculations" on page 197 of this
manual.
3. Select the IOL Group, if necessary, by pressing the
button beneath the selection "Select IOL Group"
until the appropriate IOLs are displayed.
Figure 25 Calculate IOL Screen
To Next Page
Loading...
