188
Accutome A-Scan Plus User’s Guide
An eye type that is considered custom will have a *
beside its name on all patient data screens.
Customize Eye
Type Screen
The Accutome A-Scan Plus provides access to the
Customize Eye Type screen through the Measure
screen. When you power on the instrument it starts up
at the Measure screen. When you press the button
beneath the selection "Customize Eye Type" the
Customize Eye Type screen will be displayed.
In the Customize Eye Type screen you can create and
define new eye types or review the current eye type
definition. You can select pre-entered selections in each
field, or you can create your own.
Customize Fields and Menu Selections
The Customize Eye Type screen displays the following
fields.
OD
The OD eye type name.
OS
The OS eye type name.
Eye Type Table
Located to the right of each eye type name is a table with
fields defining the material and velocity for AC, Lens, and
VC. You can change all the fields that are white. You
cannot change any field that is filled grey.
AC
The AC (Anterior Chamber) material name and velocity
Lens
The Lens material name and velocity and thickness
setting. Thickness can be measured or assumed. Press
the Delete key to change the Lens Thickness field from
assumed to measured.
To Next Page
Loading...
