229
Personalizing Lens Constants How to Personalize Constants
Selecting an IOL Group and Lens
There are two ways to select an IOL Group and Lens:
you can use the knob and first select and activate the
IOL Group, and then select and activate the IOL Table,
and then select and activate the IOL, or you can
continuously press the button beneath the Next IOL/
Group soft menu selection.
Next IOL/Group
The Next IOL/Group selection scrolls through all entered
IOL Groups and their associated lenses. Once you
reach the last IOL in a group, the selection moves down
to the next IOL group and scrolls through the next
group’s IOLs, and so on until the user reaches the end of
the IOL Groups. If you then continue to press the button
for the Next IOL/Group selection, the A-Scan will display
the top of the list.
To Next Page
Loading...
