179
Performing Measurements How to Adjust Gates/Threshold
How to Apply Gate Adjustments to All Waveforms
You may want to apply a gate adjustment to all current
eye waveforms.
To apply a gate adjustment:
1. Press and hold the button beneath the Gate selec-
tions for approximately one second. The text on
the Gate menu selection will then read "Gate
(All)..." for whichever gate is selected. For exam
-
ple, you just completed selecting the anterior lens
gate and you hold the Gate menu button; the
selection will then read "Gate (All) Ant Lens Gate".
2. Move the gate to the desired location. The gate is
moved in all waveforms for the current eye. For
each movement, each waveform is re-evaluated
and new measurements are updated in the mea
-
surement table.
To Next Page
Loading...
