196
Accutome A-Scan Plus User’s Guide
11. All the custom changes to the Patient Eye Type will
be followed by an asterisk (*), as shown in
Figure
135 below.
12. Adjust any other eye type fields following the same
procedures.
13. When you have completed customizing the patient
eye, press the button beneath the selection
"Done..." to deactivate the Custom Eye Type
Screen. You will return to the Measure Screen and
the new eye type information will be displayed for
the patient.
[All eye types include an assumed cornea]
Figure 135 OS Eye Type Customized
To Next Page
Loading...
