Accutome a-scan plus - How to Capture a Waveform

163
Performing Measurements How to Capture a Waveform
How to Cap-
ture a Wave-
form
You can "freeze" or, capture, the waveform with the
optional footswitch or by pressing the button beneath the
Run/Frozen selection on the front panel, or by pressing
the Measure button at the top right corner.
Using the Foot Switch
When you want to capture a waveform simply press on
the footswitch. The Accutome A-Scan Plus will switch
from "Running" to "Frozen".
Using the Running/Frozen Button
When you want to capture a waveform press the button
beneath the Running/Frozen selection. The Accutome
A-Scan Plus will switch from Running to Frozen.
Using the Measure Button
When you want to capture a waveform, press the
Measure button at the top right corner. The Accutome A-
Scan Plus will switch from Running to Frozen.