Accutome a-scan plus - Calculate; Measure Button; Patient Record Button; Preferences

53
How to Use the Buttons and Screens Accutome A-Scan Plus Buttons
*Note: Two of the dedicated buttons, Calculate and
Preferences, can be pressed multiple times to scroll
through lower level linked screens.
Measure Button
The Measure button displays the Measure Screen where
the user can acquire patient waveforms and adjust
waveform parameters. The Measure Screen can also
display stored Patient waveforms, in the state in which
the waveform was originally captured. From the
Measure Screen you can also access the Customize
Eye Type Screen.
The Measure button can also be used to replace the
footswitch. Pressing the measure button is the same as
pressing the footswitch.
Patient Record Button
The Patient Record button displays the Patient Record
Screen where you save and recall patient
measurements and calculations.
Calculate
The Calculate button displays the Calculate Screen
where IOL calculations are performed. From the
Calculate Screen you can also access the IOL Groups
Screen.
If you press the Calculate button multiple times the
Accutome will scroll and display the lower level logically
linked screens; i.e. IOL Groups Screen and Personalize
IOLs Screen.
Preferences
The Preferences button displays the Eye Types Screen
where you can define eye types and velocities. From the
Eye Types Screen you can access the Setup screen
where you define default settings.