61
How to Use the Buttons and Screens Screens
Selecting a New Active Area
To select a new active area, you must first deactivate the
current active area by pressing the knob, or the
Affirmative button.
Changing Fields in the Active Area
There are two primary types of fields; pre-entered fields
that have been set up at the factory and that can not be
manually changed and fields that require information to
be entered.
Pre-entered Fields
There are many fields that contain pre-entered
information that cannot be changed. For example, in the
Setup Screen there is a limited number of selections
available for the Printer and three selections available for
Delete Confirm.
To change the value of a pre-entered field:
1. Select the field by rotating the knob.
2. Activate the field by pressing the knob or the Affir-
mative button.
3. When the field is active, rotate the knob to select
one of the pre-entered values.
Fields Requiring Information
There are several fields that require the input of
information. For example, the Patient name field.
To enter information in a field:
1. Select the field by rotating the knob.
2. Activate the field by pressing the knob or the Affir-
mative button.
3. When the field is active, enter the appropriate
information.
To Next Page
Loading...
