68
Accutome A-Scan Plus User’s Guide
How to Add a
New Eye Type
The Accutome A-Scan Plus provides the ability to
customize the current patient eye type for unique or rare
eye types using the Customize Eye Type screen.
When you add a new eye type you will add the eye type
to the Eye Types table shown in
Figure 35 on page 69.
Prior to adding the eye type to the table, you must define
all materials that may constitute the new eye type. You
must first, if necessary, add a new Lens Material and
Velocity, and new Anterior/Vitreous Material and Velocity.
*Note: It is also possible to edit existing Eye Type
information in the Accutome A-Scan Plus. To edit
eye type information follow the same procedure as
adding eye type information.
CAUTION: Changing eye type and
velocity information does not
effect the eye type information
for current and saved patients.
The changes will be in effect
the next time the changed
eye type is selected or a new
patient is started.
Current patient eye types that
do not match the settings on
the Eye Types Screen are
indicated with * on the
Measure and Calculate
screens.
To Next Page
Loading...
