32
Accutome A-Scan Plus User’s Guide
How to Adjust the Contrast
When you turn on the Accutome A-Scan Plus you may
have to adjust the contrast of the display. The display is
an LCD (Liquid Crystal Display) and depending upon the
angle from which you are viewing the screen, the images
displayed may not be bright enough or may be too bright.
To adjust the Accutome A-Scan Plus screen contrast:
1. Press and hold the Preferences button (see Figure
17 on page 31).
2. Rotate the knob while observing the change in
grey/white contrast on the screen.
3. When the contrast is properly adjusted release the
Preferences button.
To Next Page
Loading...
