14
Accutome A-Scan Plus User’s Guide
Figure 2 Accutome A-Scan Plus Components
Probe
The probe provided with the Accutome A-Scan is an
essential component. No other probes should be used
with the instrument.
Printer
The Accutome A-Scan can be configured with either a
Laser Jet or Ink Jet printer. If using a Laser Jet printer,
an HP Laser is recommended, specifically any printer
that uses the HP PCL5 printer language. If using an Ink
Jet printer, an HP Ink Jet is recommended, specifically
any printer that uses the HP PCL3 printer language.
The Accutome A-Scan also provides generic text only
printing that is compatible with most printers. When you
print with the text only you will not be able to print graphic
items such as Patient waveforms.
To Next Page
Loading...
