269
Specifications Acoustic Output
These values are based on measurements of production units.
The “derated” intensity calculations are based on the measured center
frequency of the acoustic signal (f
c
, MHz) and the distance from the
transducer under test to the hydrophone (z, cm) using the derating
factor e
-0.069f
c
z
.
Operat-
ing Con-
trol
Condi-
tions
Control 1
Control 2
Control 3
Control 4
Control n
Table 11 Acoustic Output Reporting Table for Track 1
Non-Autoscanning Mode
To Next Page
Loading...
