4
9102 Handheld Spectrum Analyzer Software version 5.31 81
Chapter 4 Channel Power Operation
This chapter describes the instrument’s functions in channel power
measurement mode. Topics discussed in this chapter are as follows:
– “About the channel power mode” on page 82
– “Selecting the measurement mode” on page 85
– “Operating in channel power mode” on page 86
– “Reading the channel power” on page 87
– “Changing the occupied bandwidth percentage” on page 87
– “Working with communication systems and frequency settings” on
page 87
– “Setting up the level parameters” on page 90
– “Changing the input impedance” on page 93
– “Setting up the trace” on page 94
– “Storing and loading traces” on page 99
– “Viewing the channel power mode parameters” on page 101
To Next Page
Loading...
