12
9102 Handheld Spectrum Analyzer Software version 5.31 181
Chapter 12 EMF (EMI) Operation
This chapter describes the instrument’s functions that are specific to
the EMF (EMI) mode. Topics discussed in this chapter are as follows:
– “EMF measurements” on page 183
– “Measurement methods” on page 185
– “Measurement antennas” on page 188
– “EMF measurements with the 9102” on page 194
– “Connecting the antenna” on page 196
– “Selecting the measurement mode” on page 197
– “Selecting the unit” on page 197
– “Selecting the frequency range” on page 198
– “Selecting RBW, VBW and SWT” on page 201
– “Specifying the display calculation” on page 202
– “Specifying level settings” on page 202
– “Performing automatic measurements” on page 203
– “Performing manual measurements” on page 207
– “Using limits” on page 210
– “Using Markers” on page 210
– “Viewing the EMF (EMI) mode parameters” on page 210
To Next Page
