Aeroflex 9102 - Predefined Systems in the 9100 Data Exchange Software

Appendix B Predefined Settings
Predefined channel power communication systems
360 9102 Handheld Spectrum Analyzer Software version 5.31
Predefined systems in
the 9100 Data Exchange
Software
The following table lists all further communication systems available in
the 9100 Data Exchange Software for download to the 9102. For
details on using these systems refer to “Managing communication
systems for channel power measurements” on page 245.
Table 3 9100 Data Exchange Software channel power systems
System name Meaning
Frequency
range
Channel
numbers
(n)
Center frequencies
(f
c
)
Channel
width
GSM450-UL GSM 450
Uplink
450.4 to
457.6 MHz
259 to
293
f
c
= 450.6 + 0.2*(n -
259)
200 kHz
GSM450-DL GSM 450
Downlink
460.4 to
467.6 MHz
259 to
293
f
c
= 460.6 + 0.2*(n -
259)
200 kHz
GSM480-UL GSM 480
Uplink
478.8 to 468
MHz
306 to
340
f
c
= 479 + 0.2*(n -
306)
200 kHz
GSM480-DL GSM 480
Downlink
488.8 to 496
MHz
306 to
340
f
c
= 489 + 0.2*(n -
306)
200 kHz
GSM850-UL GSM 850
Uplink
824 to 849 MHz 128 to
251
f
c
= 824.2 + 0.2*(n -
128)
200 kHz
GSM850-DL GSM 850
Downlink
869 to 894
MHz
128 to
251
f
c
= 869.2 + 0.2*(n -
128)
200 kHz
EGSM900-UL Extended
GSM
Uplink
880 to 915 MHz 975 to
1023
f
c
= 890 + 0.2*(n -
1024)
200 kHz
EGSM900-DL Extended
GSM
Downlink
925 to 960 MHz 975 to
1023
f
c
= 935 + 0.2*(n -
1024)
200 kHz
PGSM900-UL Primary
GSM
Uplink
890 to 915 MHz 1 to 124 f
c
= 890 + 0.2*n 200 kHz
RGSM900-UL Railways
GSM
Uplink
876 to 915 MHz 955 to
1023
f
c
= 890 + 0.2*(n -
1024)
200 kHz
PCN1800-UL GSM 1800
Uplink
1710 to 1785
MHz
512 to
885
f
c
= 1710.2 + 0.2*
(n -512)
200 kHz
PCS1900-UL GSM 1900
Uplink
1850 to 1910
MHz
512 to
810
f
c
= 1850.2 + 0.2*
(n - 512)
200 kHz
BLUETOOTH USA/
Europe
2402 to 2480
MHz
0 to 78 f
c
= 2402 + n 1 MHz
USCELL-UL U.S. cellu-
lar Uplink
824 to 849 MHz 1 to 799 f
c
= 825 + 0.03*n 1.25 MHz
USCELL-DL U.S. cellu-
lar Down-
link
869 to 894
MHz
1 to 799 f
c
= 870 + 0.03*n 1.25 MHz