7
9102 Handheld Spectrum Analyzer Software version 5.31 115
Chapter 7 Transmission Operation
This chapter describes the instrument’s functions that are specific to
the transmission mode. Topics discussed in this chapter are as follows:
– “About the transmission mode” on page 116
– “Selecting the measurement mode” on page 116
– “Switching the tracking generator on and off” on page 117
– “Normalizing the trace” on page 117
– “Setting the tracking output power” on page 118
– “Changing the frequency settings” on page 119
– “Selecting RBW, VBW and SWT” on page 122
– “Setting up the level parameters” on page 122
– “Applying special functions on the signal” on page 125
– “Setting up the trace” on page 127
– “Storing and loading traces” on page 134
– “Viewing the transmission mode parameters” on page 136
To Next Page
