Chapter 4 Channel Power Operation
Working with communication systems and frequency settings
9102 Handheld Spectrum Analyzer Software version 5.31
89
Deleting a
communication system
To delete a the communication system settings stored on the 9102,
take the following steps.
1 From the main menu, select
Ch. System > System Memory.
The System Memory menu appears.
2 Push the
Delete System softkey.
A scroll box with the list of available communication systems
appears.
3 Select the system settings to be deleted by moving the U
P/DOWN
cursor keys to the respective system settings name, and confirm by
pressing E
NTER.
The system settings are deleted from the list.
4Press E
SCAPE to close the input field and the scroll box.
Deleting all
communication systems
You can clean up previously stored communication systems and easily
delete all of them, including those that were originally delivered with
the 9102.
1 From the main menu, select
Ch. System > System Memory.
The System Memory menu appears.
2 Push the
Delete All softkey.
A box appears, asking you to confirm that you want to delete all
communication system settings.
3Press E
NTER to confirm deletion or ESCAPE to prevent the 9102
from deleting all the communication systems.
If confirmed, all the communication systems are deleted, that
means the list of communication systems will be empty.
Undeleting default
communication systems
If you have deleted communication systems that were delivered with
the 9102, you can restore these system settings.
1 From the main menu, select
Ch. System > System Memory.
The System Memory menu appears.
2 Push the
Restore Default Systems softkey.
The 9102 creates all the communication systems that were origi-
nally delivered with the 9102.
Using the 9100 Data
Exchange Software with
communication systems
With the 9100 Data Exchange Software, more communication systems
can be defined, loaded to the 9102 and selected for use. See section
“Managing communication systems for channel power measurements”
on page 245 for more information. Furthermore, within the 9100 Data
Exchange Software fruther predefined communication systems are
available for transfer to your 9102. For a listing of the communication
systems available refer to “Predefined systems in the 9100 Data
Exchange Software” on page 360.
To Next Page
