Aeroflex 9102 - System:error:code:all; System:error:code[:Next]; System:error[:Next]

Chapter 16 SCPI Command Reference
System commands
268 9102 Handheld Spectrum Analyzer Software version 5.31
:SYSTem:ERRor[:NEXT]?
:SYSTem:ERRor:COUNt?
:SYSTem:ERRor:CODE[:NEXT]?
:SYSTem:ERRor:CODE:ALL?
Syntax
:SYSTem:ERRor[:NEXT]?
Parameters
There are no parameters.
Command
There is solely a query form of this command available.
Query
Returns the oldest unread error message from the internal error queue of
the Aeroflex 9102. The queue entry returned will be a string (text). The
maximum length of the text is 255 characters.
Note: A list of error messages can be found in section “SCPI errors” on
page 334.
Example
*RESET
:SYSTem:ERRor:NEXT?
String returned in this example: -113,"Undefined header"
Syntax
:SYSTem:ERRor:COUNt?
Parameters
There are no parameters.
Command
There is solely a query form of this command available.
Query
Returns the number of unread error messages in the internal error queue
of the Aeroflex 9102. The string returned will contain one integer. The max-
imum number of errors stored internally is 10.
Example
:SYSTem:ERRor:COUNt?
String returned in this example: "0"
This means that there are no unread error messages in the error queue.
Syntax
:SYSTem:ERRor:CODE[:NEXT]?
Parameters
There are no parameters.
Command
There is solely a query form of this command available.
Query
Returns the code of the oldest unread error message in the internal error
queue of the Aeroflex 9102. The string returned will contain one integer
(and no text).
Note: A list of error messages can be found in section “SCPI errors” on
page 334.
Example
*RESET
:SYSTem:ERRor:CODE?
String returned in this example: "-113"
This means that an undefined header (*RESET) was received.
Syntax
:SYSTem:ERRor:CODE:ALL?
Parameters
There are no parameters.
Command
There is solely a query form of this command available.