Aeroflex 9102 - System Commands; System:date; System:time

Chapter 16 SCPI Command Reference
System commands
264 9102 Handheld Spectrum Analyzer Software version 5.31
System commands
With the system commands, the internal settings of the 9102 Handheld
Spectrum Analyzer can be changed.
:SYSTem:DATE
:SYSTem:TIME
Syntax
:SYSTem:DATE <int1>,<int2>,<int3>
Parameters
intx are three integers.
The minimum value for int1 is 1998, the maximum is 2100. The default
value is 1998.
The minimum value for int2 is 1, the maximum is 12. The default value is
1.
The minimum value for int3 is 1, the maximum is 31. The default value is
1.
Command
Sets the system date. This command uses the following format:
yyyy,mm,dd where
yyyy stands for the four digits of the year (int1),
mm gives the current month (int2),
dd represents the day of the current month (int3).
Query
Reads and returns the current system date in a string, using the format
explained above.
Example
:SYST:DATE 2001,7,6
Sets the system date to the July 6, 2001.
Syntax
:SYSTem:TIME <int1>,<int2>,<int3>
Parameters
intx are three integers.
The minimum value for int1 is 0, the maximum is 23. The default value is
0.
The minimum value for int2 is 0, the maximum is 59. The default value is
0.
The minimum value for int3 is 0, the maximum is 59. The default value is
0.
Command
Sets the system time. This command uses the following format: hh,mm,ss
where
hh stands for the two digits of the current hour, using a 24 hour time format
(int1),
mm gives the current minute (int2) and,
ss represents the seconds of the system time (int3).
Query
Reads and returns the current system time in a string, using the format
explained above.
Example
:SYST:TIME?
String returned in this example: "14,56,05" meaning roughly four min-
utes to 3 pm.