Chapter 1 Overview
What’s new
9102 Handheld Spectrum Analyzer Software version 5.31
3
What’s new
Version 5.31 9100 in DTF mode now transmits VSWR reference level to 9100 Data
Exchange Software when necessary
Version 5.30 Firmware now shows Aeroflex logo
Version 5.20 Supports Reference Level Offset
Temperature correction for high band corrected
Version 5.12 In DTF mode, the VSWR unit is displayed.
Version 5.10 Supports external time base (reference frequency), shown in 9100
Data Exchange when active.
Improved remote control commands for Power Sensor mode.
Version 5.00 New options supported:
–9168 GPS Receiver Option
– 9162 Insertion Power Sensor
– 9151 Frequency Extension 7.5 GHz
New features in 9100 Data Exchange Software version 5.00
– Marker description with break-out line can be added to the trace
– Trace data or graphics can be copied to the clipboard and pasted
into a word processor or spreadsheet application
– Printout header can be defined
Version 4.50 In DTF mode, the calibration cable dielectric and length can be
entered.
Minor corrections.
Version 4.11 Improvements:
– Trace average function corrected.
– Too low sweep time at 200 kHz RBW now gets an UNCAL warning.
To Next Page
